---
name: live-structure-check
description: Build a live parametric design tool where architectural sliders drive a structural frame model, coloured by member utilisation as you design. Use when someone wants to test form against structure at concept stage, a parametric structure tool, or a 'does it still stand up' check while sketching.
---

# Live structure check

From P418, Vessel stair. Claude Code, Opus 5.5.

## What it does
Makes a single-page tool in the browser: architecture on the left (form sliders), a 3D view in the middle, structure on the right (sections, steel grade, loads). Every slider change re-solves a 3D frame model and recolours every member by utilisation, green through yellow to red at 1.0. On P418 a change took 30 to 60 ms.

## When to use
- Concept stage, when the form is still moving and you want structure in the conversation early.
- A form with one obvious rule set (a stair, a lattice, a shell) that can be written as code.

## Instructions
1. Write the form as a function of the sliders. Keep code rules inside it (on P418, the stair stays inside NCC 2022 D3D14 whatever the sliders do).
2. Model every member as a frame element with rigid joints. Factor the stiffness matrix once and reuse it for every load combination.
3. Use the code combinations (AS/NZS 1170.0 in Australia) and simplified member checks (after AS 4100). Show the governing check when you hover a member.
4. Show peak utilisation, steel tonnage and the first period as live numbers.
5. Bundle to one self-contained HTML file that works offline.

## Output
A self-contained HTML tool, plus a Node harness that runs the solver headless for sweeps and screenshots.

## Watch for
It's a comparative, concept-stage tool. Connections, local buckling, second-order effects and dynamic crowd loads are out of scope, and the page must say so. An engineer signs off the real thing.

---
Free from chiangning.net/resources/showcase-reel

Copyright 2026 Stanton Dahl Architects. All Rights Reserved.
